Cart
Your cart is empty
What if you could easily store your weight training equipment? Store all your weights and bars in less than 1 m2 of space.
This storage rack (230 kg max) lets you organize all your weights, bars, dumbbells and kettlebells. The little extra: Plus it comes with 1 adaptor for storing 28 mm or 50 mm bars.
What if you could easily store your weight training equipment? Store all your weights and bars in less than 1 m2 of space.
This storage rack (230 kg max) lets you organize all your weights, bars, dumbbells and kettlebells. The little extra: Plus it comes with 1 adaptor for storing 28 mm or 50 mm bars.
What if you could easily store your weight training equipment? Store all your weights and bars in less than 1 m2 of space.
Product dimensions: - Depth: 59 cm - Width: 76.5 cm - Height: 84 cm - Weight: 15.5 kg This product is delivered in a box that: - Length: 79 cm - Width: 45.5 cm - height: 25 cm - Weight: 19 kg
- Store kettlebells and dumbbells (max 80 kg) on the rack. - Each tube can hold 50 kg max of 28 mm or 50 mm plates. - The space between each tube can hold bumpers on the 2 exterior tubes. - You can also attach 2 bars (28 mm or 50 mm diameter) to the back of the rack
Thanks to the bar rack adapter, our storage rack can hold both 28 mm and 50 mm bars If you want to store two 50 mm bars, you can order another adaptor (ref:: 8600455)
Our product was designed for indoor use (in your home or garage). It should not be used outdoors as the paint was not treated for this use.
Despite the heavy weight resting on our storage rack, the pads underneath protect your floor from scratches.
Parts of your rack may wear out, all our parts can be ordered online - Right leg (ref: 8851077) - Left leg (ref: 8851078) - Lower crossbar (ref: 8851080) - Upright (ref: 8851079) - Storage plate (ref: 885108) - Screw kit (ref: 8851082) - Plastic end caps (ref: 8851083) - Sleeve/adaptor (ref: 8600455) - Pads (ref: 8821096) Find all spare parts on our support site.
This storage rack (230 kg max) lets you organize all your weights, bars, dumbbells and kettlebells. The little extra: Plus it comes with 1 adaptor for storing 28 mm or 50 mm bars.
What if you could easily store your weight training equipment? Store all your weights and bars in less than 1 m2 of space.
Je kan max 2 bevestigingen gebruiken om bumperplates van 50mm aan te bevestigen. De afmetingen van dit rek laten niet toe om ook de derde bevestiging hiervoor te gebruiken. Exact over dit punt ben ik me gaan gaan bevragen in de winkel in Hasselt, waar ze me bevestigden dat dit wel mogelijk was. Na bestellen en installatie, blijkt dit niet het geval te zijn. Mooi product aan een goede prijs, maar had compatibel moeten zijn om aan de drie bevestigingen bumperplates van 50mm te kunnen bevestigen.
Ich habe den Hantelständer in der Annahme bestellt, dass ich auf allen drei Pins Bumper Plates mit einem Durchmesser von 44 cm lagen kann. Das ist leider nicht der Fall. Der Platz ist nicht ausreichend. Schade, dass die oberen Pins nicht um wenige Grad nach außen gedreht sind. Dann würde es reichen. Ich habe den unteren Träger nun nach hinten gedreht. Somit kann ich große Plates auf alle Pins stecken aber besonders komfortabel ist das nicht. Weiterhin ist der Lack extrem dünn und anfällig. Schon nach wenigen Tagen sind die Pins von der Benutzung komplett blank. Die Idee von den Ständer ist super. Die Umsetzung ist verbesserungswürdig.
Bom, mas demasiado caro.