Easy stand-up paddle and kayak dual-action high-pressure easy pump 0-20 PSI

Our team has refined the diameter of the piston to reduce the force needed for inflation. 15 psi with this pump is equivalent to 11 psi with a classic pump.

Directions for use

1/ Stand on level and solid ground 2/ Check that the hose is attached on the INFLATE side 3/ Connect the hose to the inflatable 4/ Turn the orange ring to position 1 5/ Inflate the craft until it becomes difficult (approx. 8 PSI) 6/ Turn the orange ring to position 2 7/ Finish inflating to the recommended pressure. Pump supplied with 2 seals on the inflation nozzle to fit most valves on the market. (orange: ITIWIT / black: other)

Storage instructions

Use the 2 fastening clips to attach the hose and pump together. Do not stand on the pump or the hose. Clean off any sand, it can damage the seals.

Technical dimensions

Height: 60 cm Width: 27 cm Depth: 12 cm Hose length: 100 cm 60 mm diameter piston for easy high-pressure inflation. Easy to inflate for everyone. Pump weight: 1.2 kg Volume of air transferred: Mode 1: 2.1 litres Mode 2: 1.2 litres

Sold with a set of adapters

In addition to its standard adapter to inflate your dropstitch SUP or kayak to high pressure, the pump also comes with: A "Mini Boston" adapter to inflate the kayak seats a "Boston" adapter to inflate low-pressure kayaks, inflatable air mattresses and tents. An adapter and end piece to inflate certain kitesurfing wings.

Repair

We design our products so that they are as repairable as possible. The following spare parts are available for this pump: Handle + Pressure gauge: 8810939 Aluminium tube: 8810947 Hose: 8810949

The double-action high-pressure pump is designed to easily inflate SUPs or kayaks to pressures of up to 20 PSI. DEFLATE mode can also be used to optimise the storage of the inflatable

Ease of use

2 MODES mode 1: inflation (0-8 PSI) mode 2: pressurisation (8-20 PSI)

Versatility

Can be used to inflate and deflate your inflatable

Parameter measurement

Built-in 3-20 psi pressure gauge. Accurate from 3 PSI.

Ergonomic grip

Wide feet for maximum stability. Ergonomic handles for comfort.

Compact design

Clip-on hose for easy transport and storage.

Robustness

Heavy-duty hose with rotating head to prevent disconnecting during inflation.

Repair

The hose, pressure gauge, handle and aluminium tube are available as spare parts

Our team has refined the diameter of the piston to reduce the force needed for inflation. 15 psi with this pump is equivalent to 11 psi with a classic pump.