Adult's Inflatable Life Jacket LJ 150N AIR - Black

The trigger uses a UML salt bobbin that is water- and humidity-sensitive. Storing it in a humid, poorly ventilated and/or warm place can cause condensation, triggering it. To avoid untimely triggering, we recommend making sure that the jacket is dry (inside and outside) before storing it in a well-ventilated place. Storing it in a humid, poorly ventilated and/or warm place can cause condensation, triggering it.

When dropped in water, the salt bobbin dissolves instantly, piercing the canister of compressed CO₂ and inflating the bladder in less than five seconds. To re-arm the jacket: - Deflate it using the back of the oral inflation tube cap. - Fold the bladder and close the textile cover. Change the cartridge and the salt bobbin following the instructions for the re-arming kit: 8303768

Designed for sailors who weigh between 40 and 130 kg with a waist circumference of 60 to 130 cm.

- CO² cartridge: check that it has not been perforated, there are no signs of corrosion, and it is firmly screwed in - Trigger (black): firmly screwed in, has not expired, the green cap is present - the perforating mechanism (yellow): the green seal (green triangle) is present, indicating that the jacket has not been triggered. - The jacket: Complete and with no signs of wear (tears, fraying), inflatable bladder stored away in its bag.

In addition, regularly (at least once a year): - Inflate the life jacket using the mouthpiece and leave inflated for 24 hours: the pressure of the life jacket must not drop - Check the expiry date of the trigger

Be careful to install in the correct order: 1. Remove the CO² bobbin and the salt bobbin 2. Replace the salt bobbin 3. Replacing the CO² cartridge If you do not follow this order of installation, there is a risk of striking the new cartridge if the trigger system for the salt bobbin has been previously used.

The dates shown on the CO² cartridge and the salt bobbin have different meanings: - Salt bobbin = expiry date in the following format: 05 2025 (May 2025). The bobbin must be replaced after this date. - CO² cartridge = date of manufacture, in the format 05 2021 (manufactured in May 2021): The cartridge must be replaced 5 years after this date.