Bike Chain Cleaner

This chain cleaner has been designed to give you good efficiency while using much less product than its predecessor. The previous model required 45 ml, whereas this one only needs 9 ml. So, with a 500 ml canister you can do about 55 cleans (compared to about 15 with the previous one).

Use the vegetable chain degreaser for greater efficiency. Renew your degreaser as soon as it is blackened. Collect your used degreaser and dispose of it at a waste disposal centre.

After use, to maintain its effectiveness, remove the foam from the chain cleaner (located on the front), rinse and wring out. Rinse the castors and compartments with clean water, leave to dry and wipe. The foam will certainly be marked by the passage of the chain over the first few uses, which will in no way detract from its usefulness.

Press the push button on the bottom compartment while pulling on the top part with the other hand. Place the chain between the two parts of the cleaner and close them by fitting the top part into the bottom part. Install the hook on your derailleur hanger. Pour the degreaser through the hole at the top, observing the recommended level (around 9 ml). Clean your chain by turning the pedals anti-clockwise.

The chain cleaner includes: - a lower compartment with 1 rotating brush, 1 foam and 1 hanging system - an upper compartment (cover) with 2 rotating brushes. Dimensions: Length: 160 mm Height: 91mm Width: 38mm

Leave for a few minutes. Complete the degreasing process with a few turns of the pedals. Remove your chain cleaner. We recommend that you rinse and dry your chain thoroughly before applying any lubricant. To ensure that your chain cleaner works at its best, it is important to position your bike (on the ground or on a stand) so that your chain is as horizontal as possible.

215 g

A kit including the 3 brush shafts, the hook and 2 foam pads is available to order to give your chain cleaner a second life.