1 Hiking Pole - MT100 Ergonomic Green

Fully designed and validated by our team. This model uses the chassis of the A200. It retains the push-pin adjustment system and over-sized tubes. Why do we offer this grip that is held from above? We have noticed that the standard grip does not suit everyone, particularly for long periods. We therefore designed this pole slightly differently so that you do not have to bend your wrist and can spread the force more evenly in the arm as it is aligned with the pole.

At Decathlon, we have decided to sell our hiking/trekking poles individually. First because of how they are used. Indeed, some people only want to use one pole. Also, if one of your poles breaks, this means you only have to buy one and not a complete pair.

The advantage of buying Forclaz trekking poles is that you have a wide choice of compatible accessories and spare parts. So you can enjoy it for as long as possible. Hiking pole caps: ref. 8580865 Summer baskets: ref. 8737774 Winter baskets: ref. 8503857 Replacement tip: ref. 8577675 or 8755646 (if new screwable version)

the arm along the body must be almost straight or slightly bent. It is therefore shorter than a conventional pole. To do this: - pull the lower part until the push-pin locks (lower metal button) - slide the middle tube until the upper button reaches the desired hole - use the lines printed on the tubes to align the push-pin with the holes Never go over the STOP line to avoid breaking the pole

This hiking pole is designed to help you balance, propel yourself and distribute effort between arms and legs. To be on the safe side, check before you set off and at regular intervals that your baton is locked in place by simulating heavy bumps. Do not put on your backpack in case of a storm.Some users are sensitive to the whistling noise that can occur when the wind sweeps through the adjustment holes.

Maintaining your poles properly enable you to maintain optimal function and increases their lifespan. After use, if water has got into the pole, take the parts apart and allow to dry. Clean any dust and mud with water or without, with a soft brush or paintbrush. Once dry, you can reassemble the parts. We recommend that you do not try to oil or grease them.